Calculating Method on Storage Side Pressure of Silo Structures under Earthquake
Abstract
In order to get reasonable seismic design for silo structures and obtain the practical calculated value of storage side pressure, the “Shi Weixing” calculation method of storage side pressure under the earthquake is introduced at first. Based on the material parameters which can be obtained in engineering design, the revised parameters needed in the calculation of storage side pressure are determined. Then, the numerical model of silo structure is established with ABAQUS to calculate the side pressure variation curve and the correction values of the corresponding parameters are obtained by curve fitting. Modified formulas of side pressure considering silo-storage interaction are summarized by synthesizing different parameters. Finally, the calculated values obtained from the modified formula of storage side pressure are compared with the existing test data and the design values of the code. The results show that the calculated values are in good agreement with the experimental values and can reflect the real and reasonable storage side pressure. Compared with the results, the storage side pressure under the action of strong earthquake is dangerous according to the design value of the code, which means that the proposed calculation formula in this paper is more economical and reliable.
Keywords: reinforced concrete silo, seismic action, storage side pressure, calculation method
Full Text:
PDFReferences
SHI W X,ZHU B L. The experimental study of earthquake response of RC cylinder silos [J]. Special Structures,1994,11(4):55—58. (In Chinese)
SHI W X,ZHU B L. Study on lateral pressure of coal silo under earthquake[J]. Special Structures,1993,10(1):16—18.(In Chinese)
HOLLER S,MESKOURIS K. Granular material silos under dynamic excitation:numerical simulation and experimental validation [J]. Journal of Structural Engineering,2006,132(10):1573—1579.
ZHANG C,SHU G P. Experimental research of ground-supported steel silo model’s discharge [J]. Journal of Southeast University (Natural Science Edition),2009,39(3):531—535.(In Chinese)
ZHANG C,SHU G P. Effect of particle shape on biaxial tests simulated by particle flow code[J]. Chinese Journal of Geotechnical Engineering,2009,31(8):1281—1286.(In Chinese)
ZHAO S. Analysis and application for silo storage pressure[D]. Wuhan:College of Civil Engineering and Architecture,Wuhan University of Technology,2013:19—23.(In Chinese)
ZHOU C D,GUO K P,MENG L K,et al. Static interaction analysis of RC silo structure-granular material [J]. Journal of Tongji University(Natural Science),2015,43(11):1656—1661. (In Chinese)
PANG Z K,YUAN F,LI B T,et al. Research on dynamic overpressure of two different unloading ways for side wall and central unloading of silos[J]. Henan Science and Technology,2018,33(22):113—114.(In Chinese)
LI Z F,PENG Z,JIANG Y M. Measurements of granular pressure in silo:Janssen behaviour and deviation [J]. Acta Physica Sinica,2014,63(10):104503-1-8.(In Chinese)
HAN Y,LIDQ,CHEN J H,et al. Experimental study on boundary pressure and wall friction under static grain storage in silo[J].Transactions of the Chinese Society of Agricultural Engineering,2018,34(13):296—302.(In Chinese)
CHENG Q P,SUN W W,LU S. Discrete element analysis of squat silo under eccentric discharge by PFC3D[J]. Journal of Civil Engineering and Management,2016,33(6):43—47.(In Chinese)
Refbacks
- There are currently no refbacks.