Research on Damage and Energy Dissipation Characteristics of Cemented Backfill under Different Loading Rates

Hou Yongqiang, Yin Shenghua, Cao Yong, Dai Chaoqun

Abstract

   As the destruction of the backfill caused by the mining of the ore body can be regarded as a loading process at different loading rates, a uniaxial compression test of cemented filling bodies under five loading rates was carried out in the laboratory. Based on the stress-strain curve of the filling body, according to the principle of energy dissipation and damage mechanics, the energy consumption value of the backfill at different loading rates was calcu lated and the corresponding damage evolution equation was constructed. Therefore, the internal relationship between the energy dissipation of cemented filling and the axial compression time and strain at different loading rates was studied, and the evolution process of energy damage for the cemented filling body under compression was discussed. The results show that unlike high-strength rocks, there is a critical loading rate for cemented backfill . When the loading rate exceeds the critical value, the backfill strength decreases with the increase of loading rate. The pre-peak energy consumption, post-peak energy consumption, strain energy per unit volume, and total energy consumption of the filling body have a quadratic function curve relationship with the loading rate. The total energy consumption of cemented backfill increases with the increase of axial compression time and axial strain in the form of a logistic function. However, the difference in loading rate makes the increase rate of energy consumption value, and the energy consumption of the backfill under the same axial deformation has obvious differences. The compression failure of backfill under different loading rates exhibits the same kind of damage process. The energy damage evolution process of the backfill under uniaxial loading can be divided into four stages: initial damage, stable development of damage, acceleration of damage and damage failure.

 

 

Keywords:  backfill,  loading rate,  strain energy,  damage characteristics,  energy consumption characteristics


Full Text:

PDF


References


HAN B，WANG X L，XIAO W G. Estimation and evaluation of backfill strength in underground stope based on multivariate nonlinear regression analysis[J]. Journal of Mining & Safety Engineering， 2012，29 (5)：714—718. (In Chinese)

WU H，ZHAO G Y，CHEN Y. Multi-objective optimization for mix proportioning of mine filling materials [J]. Journal of Harbin Institute of Technology，2017，49 (11)：101—108. (In Chinese)

WANG X M，XUE X L，ZHANG Q L，et al. Optimum ratio and application of joint cemented backfill with crushed rock and phosphogypsum [J]. Journal of Central South University (Science and Technology)，2015，46 (10)：3767—3773. (In Chinese)

LI M H，YANG Z Q，WANG Y T，et al. Experimental study of compressive strength and mechanical property of filling body for fly ash composite cementitious materials[J]. Journal of China University of Mining & Technology，2015，44 (4)：650—655. (In Chinese)

HE G C，LIU Y，DING D X，et al. Strength characteristic of cemented waste rock backfills and its application [J]. Journal of Mining & Safety Engineering，2013，30 (1)：74—79. (In Chinese)

XU W B，DU J H，SONG W D，et al. Experiment on the mechanism of consolidating backfill body of extra -fine grain unclassified tailings and cementitious materials [J]. Rock and Soil Mechanics， 2013，34 (8)：2295—2302. (In Chinese)

WANG Y T，YANG Z Q，LI M H，et al. Effect of Jinchuan copper slag on filling body strength[J]. Journal of Central South University (Science and Technology)，2015，46 (12)：4391—4397. (In Chinese)

YANG Z Q，GAO Q，WANG Y Q，et al. Research on filling body strength and rheological properties of mixed filling mortor with unclassified tailings and rod milling sand in Jinchuan mine [J]. Chinese Journal of Rock Mechanics and Engineering，2014，33 (S2)： 3985—3991. (In Chinese)

JIANG G Z，WU A X，LI H，et al. Long-term strength performance of sulfur tailings filling and its affecting factors[J]. Journal of Central South University (Science and Technology)，2018，49 (6)： 1504—1510. (In Chinese)

XIAO S Y，CAO W B，PAN H H. Experimental study on mechanical behavior of reinforced concrete beams at different loading rates[J]. Journal of Building Structures，2012，33 (12)：142—146. (In Chinese)

WANG H L，LI Q B. Experimental study on tensile behavior and strength change mechanism of saturated concrete under different loading rates [J]. Engineering Mechanicals，2007，24 (2)：105— 109. (In Chinese)

WANG J F，CHEN Y R，WU X，et al. Compressive behavior of CA mortar subject to different loading rates[J]. Journal of Materials Science and Engineering，2015，33 (4)：479—483. (In Chinese)

LI H T，JIANG C X，JIANG Y D，et al. Mechanical behavior and mechanism analysis of coal samples based on loading rate[J]. Journal of China University of Mining & Technology，2015，44 (3)： 430—436. (In Chinese)

LI Y G，JIN L Z，TAN H，et al. Experiment of loading rate effect on mechanical characteristics of cemented filling body [J]. Journal of Harbin Institute of Technology，2016，48 (9)：49—53. (In Chinese)

GAN D Q，HAN L，LIU Z Y. Experimental study of the effect of loading rate on strength performance of filling body [J]. Metal Mine，2016 (12)：150—153. (In Chinese)


Refbacks

  • There are currently no refbacks.