Research on Bearing Capacity of Hydraulic Cylinder and Effect of Frictions Existing on Both Ends
Abstract
Synthetically considering the effects of friction, fit clearance and weight, this study established the theoretical calculation model for the maximum axial bearing capacity of hydraulic cylinders. The influence rule of the frictions at two ends on the axial bearing capacity was studied. It was also simulated by finite element software, which was finally verified by related test data. The results show that the maximum axial bearing capacity calculated by the established theoretical model, compared with the test value, has an error of 13.5%, which indicates that the established theoretical model is reliable. The maximum axial bearing capacity increases with the decrease of the length-to-diameter ratios of piston rod and cylinder, or the increase of friction coefficient. However, excessive friction changes the connection state of the two ends of the hydraulic cylinder, which converts slide state to fixed state and results in abrupt increase of axial bearing capacity. With the decrease of the piston rod and cylinder lengths, or the increase of the piston rod diameter, the impact of friction on the axial bearing capacity increases. However, when the cylinder barrel diameter changes, the impact of friction on the bearing capacity is not changed. This research can provide important reference for the design and performance verification of hydraulic cylinder.
Keywords: hydraulic cylinder, bearing capacity, friction, influence rule
Full Text:
PDFReferences
ISO/TS 13725: 2016 Hydraulic fluid power-method for evaluating the buckling load of a hydraulic cylinder [S]. Geneva: International Standards Organization, 2016: 1—18.
CODINA E, KHAMASHTA M, SALAZAR E. Study of hydraulic cylinders load capacity [J]. Scientia et Technica, 2007, 35 (13): 183—188.(In Spanish)
NARVYDAS E. Buckling strength of hydraulic cylinders -engineering approach and finite element analysis [J]. Mechanika, 2017, 22 (6): 474—477.
GAMEZ -MONTERO P J, SALAZAR E, CASTILLA R. Friction effects on the load capacity of a hydraulic cylinder [J]. International Journal of Mechanical Sciences, 2009, 51 (2): 145— 151.
ZHOU Z X, WEI X H, CHEN W G, et al. Research on effects of friction and fit clearance on bearing capacity of super -long large scale hydraulic cylinder[J] . Journal of Hunan University(Natural Sciences), 2017, 44 (2): 47—52.(In Chinese)
BARAGETTI S, VILLA F. Effects of geometrical clearances, supports friction, and wear rings on hydraulic actuators bending behavior [J] . Mathematical Problems in Engineering, 2016, 2016: 1—17.
DING W S, ZHANG X, FAN Y J. Calculation and analysis of deflection on piston rod of slim hydraulic hoist cylinder [J]. Journal of South China University of Technology (Natural Science Edition), 2014, 42 (1): 17—21.(In Chinese)
LIU L H, CHEN W Y, WEI X B. Calculation and analysis on the large -scale hydraulic hoist cylinder piston [J]. Engineering Mechanics, 2010, 27 (4): 185—189.(In Chinese)
LIU Z J, XU X L, AI Y D, et al. Research on the multiplatformrapid design method of products and it's application technology [J]. Journal of Hunan University (Natural Sciences), 2016, 43(2): 48—55.(In Chinese)
YE N H, HE Y, SHI Q J, et al. Development of parameterization-based bulk material conveying machinery rapid design system [J]. Journal of Hunan University (Natural Sciences), 2016, 43 (10): 16—22.(In Chinese)
GONG J K, HE W, ZHONG C, et al. Finite element analysis of diesel engine cylinder head based on thermosetting coupling [J]. Journal of Hunan University (Natural Sciences), 2017, 44(2): 34—39.(In Chinese)
Refbacks
- There are currently no refbacks.