Analysis and Robust Design of Geometric Accuracy of a Three-axis CNC Surface Grinding Machine
In order to distribute the geometric errors of parts economically and reasonably, a method for the analysis and design of geometric accuracy was proposed. According to the specific structure of a three-axis CNC surface grinding machine, a geometric error propagation model including 21 parameters was established on the basis of multi-body system theory and homogeneous coordinate transformation method. The model was verified and it had ideal prediction accuracy. Key geometric errors were analyzed by using orthogonal design and parameter test of DOE methods. After cost analysis and error tracing, a cost-quality model for key geometric error variables was established on the basis of robust design theory. At last, the tolerances of key geometric error variables were distributed according to this model. The results have shown that the methods mentioned above are effective in the distribution of the geometric accuracy of grinding machine.
Keywords: surface grinding machine, multi-body system, geometric errors, error propagation model, robust design
RAMESH R. MANNAN M A, POO A N. Error compensation in machine tool—a review part I: geometric, cut ting- force induced and fixture-dependent errors [J]. International Journal of Machine Tools & Manufacture.2000. 40(9): 1235—1256.
KANG Fang. Research on method of CNC machine tool manufacturing accuracy distribution and optimization [D]. Beijing; College of Mechanical Engineering and Applied Electronics Technology. Beijing U-niversity of Technology .2008. (In Chinese)
LI Sheng-yi. DAI Yi-fan. Accuracy modeling technology of precision and ultra-precision machine tool [M]. Changsha; National University of Defense Technology Press.2007. (In Chinese)
LIU Zhi-feng. LIU Guang-bo, CHENG Qiang. et al. Precision modeling and prediction of precise vertical machining center based on theory of multi-body system[J]. Journal of Jilin University: Engineering and Technology Edition,2012,42(2):388—391. (In Chinese)
LIU Ttng-ting.LI Xin-ping, WANG Huifen. et al. Method of static precision digital analysis of machine tool based on theory of multibody system [J]. Aviation Precision Manufacturing Technology .2012 48(2) :28 — 31. (In Chinese)
HAN Fei-fei.ZHAO Ji, ZHANG L, et al. Synthetical analysis and experimental study of the geometric accuracy of CNC machine tools [J]. Journal of Mechanical Engineering, 2012, 48(21): 141 —148. (In Chinese)
KHAN A W, CHEN W Y. Systematic geometric error modeling for workspace volumetric calibration of a 5-axis turbine blade grinding machine [J]. Chinese Journal of Aeronautics, 2010. 23(9) : 604 — 615.
ZHU Shao-wei. DING Guo-fu, YAN Kai-yin, et al. Integrated geometric error modeling, identification and compensation of CNC machine tools [J]. International Journal of Machine Tools & Manufacture. 2012, 52(1); 24 — 29.
MAJDA P. Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools [J]. Precision Engineering.2012,36(3) :369_378.
HUANG Qiang. ZHANG Gen-bao, ZHANG Xin-yu. Sensitivity a-nalysis of the pose error of machine tool [J]. Journal of Mechanical Engineering.2009, 45(6) : 141_ 146. (In Chinese)
CHENG Qiang. LIU Guang-bo. LIU Zhi-feng.et al. An identification approach for key geometric error source of machine tool based on sensitivity analvsis [J]. Journal of Mechanical Engineering. 2012, 48 (7): 171 — 179. (In Chinese)
WANG Yu-lin. TAO Li-jia. SUN Wen-zhao,etal. Accuracy analysis and optimization of screw rotor grinding machine based on multi-body system theory[J]. Journal of Nanjing University of Science and Technology .2012.36(6): 1015—1020. (In Chinese)
- There are currently no refbacks.